美國LUMINA盧米納脈沖激光二管驅動電路板激光電源

詳細內容

 美國LUMINA盧米納脈沖激光二管驅動電路板激光電源

美國LUMINA，盧米納，脈沖激光二管驅動電路板，激光電源

參數規格

SpecificationsINPUTInput Voltage: +12 or 24VDCOUTPUTOutput Power: 75 watts averageIpulsemax: 200A peakVcompliancemax: Configurable up to 10 VINTERFACEInterface Connector: 15 Pin “D” Sub FemalePulse Enable: +5V TTL to +15V CMOSCurrent Program: 0-10V for 0-IoutmaxCurrent Monitor: 0-10V for 0-IoutmaxVoltage Monitor: 0-10V for 0-VoutmaxPERFORMANCEPulse Width Range: 20usec to 2msecMax Rep Rate: 10kHzRise/Fall Time: 10 to 50uSec. (typical)Current Regulation: 1.0% of max. output currentCurrent Ripple: <0.5% of max. output currentCurrent Overshoot: <5% of max. output currentPower Limit: Limited to maximum averagepower with power fold-backcircuitENVIRONMENTOperating Temp: 0 to 40°CStorage: -20 to 85°CHumidity: to 90% non-condensingCooling: Forced airMECHANICALDimensions: See DrawingPart Number Description: LDQPC-XX-YY-ZZXX= Current,YY = Compliance Voltage,ZZ=maximum pulse widthDCin: Input voltageExample: LDQPC-100-6-100us -24VDCThis configuration is a 100amp peak, 6 Volts complianceand the maximum pulse width will be 100us. Inputvoltage is 24VDCPin Function Description Impedance1 Enable 5 to 15V=Enable Output, Default OFF 10.0K3 Interlock Open = Off Ground to pin 4 or 9 = Run, Pin can be used for safetyswitches such as door interlock or temp switch. 10.0K4, 9 Gnd5 V out Mon. 0 to 10V = 0 to full scale output voltage 1.0K6 I out Mon. 0 to 10V = 0 to full scale output current 1.0K7 I Program 0 to 10V = 0 to Full scale Note: Accuracy will be compromised when operating below 30%of the maximum value 10.0K8 Pulse Control TTL High = On, TTL Low = Off, Default= OffNo connections to pins: 2, 10, 11, 12, 13, 14 & 15Interface Configurationwww.luminapower.com | sales@lumin

更新時間：2024/12/16 9:48:43